铀铜碲化物检测

铀铜碲化物检测哪家可靠？北检研究院可对多晶铀铜碲化物粉末样品、单晶铀铜碲化物样品、U Cu Te体系三元化合物、铀铜碲化物薄膜材料、铀铜碲化物陶瓷烧结体、铀铜碲化物单晶片、富铀型铀铜碲化物变体等21+个品类进行检测，检测中心按国标、行标及企业标准执行，检测周期与项目数量相关，具体可咨询工程师。

发布时间：2026-11-05 来源：矿石检测检测咨询量：5 报告周期：一般7-15个工作日，可加急

有检测需求？把您的样品与要求告诉检测工程师，我们会在第一时间回复您，并出具方案与报价。

立即咨询

检测范围

多晶铀铜碲化物粉末样品
单晶铀铜碲化物样品
U Cu Te体系三元化合物
铀铜碲化物薄膜材料
铀铜碲化物陶瓷烧结体
铀铜碲化物单晶片
富铀型铀铜碲化物变体
富铜型铀铜碲化物变体
富碲型铀铜碲化物变体
掺杂改型铀铜碲化物样品
铀铜碲化物热电模块材料
铀铜碲化物超导研究用样品
铀铜碲化物核燃料模拟材料
铀铜碲化物靶材
铀铜碲化物块体烧结样品
铀铜碲化物纳米粉体
铀铜碲化物合金前驱体
铀铜碲化物单晶定向切割样品
铀铜碲化物掺杂稀土元素变体
铀铜碲化物过渡金属替代变体
铀铜碲化物科研制备批次样品

检测标准（部分）

DIN EN 17851:2023-09 Foodstuffs - Determination of elements and their chemical species - Determination of Ag, As, Cd, Co, Cr, Cu, Mn, Mo, Ni, Pb, Se, Tl, U and Zn in foodstuffs by inductively coupled plasma mass spectrometry (ICP-MS) after pressure digestion
BS 7317-3:1990 Methods for analysis of high purity copper cathode Cu-CATH-1-Method for determination of antimony, arsenic, bismuth, selenium, tellurium and tin by hydride generation and atomic absorption spectrophotometry
DIN EN 17851:2022-06 Analysis of Foodstuffs - Determination of Ag, As, Cd, Co, Cr, Cu, Mn, Mo, Ni, Pb, Se, Tl, U and Zn in foodstuffs by inductively coupled plasma mass spectrometry (ICP-MS) after pressure digestion; German and English version prEN 17851:2022
GB/T 12690.12-2024(英文版) 稀土金属及其氧化物中非稀土杂质化学分析方法第12部分：钍、铀量的测定电感耦合等离子体质谱法
GB/T 12690.14-1990 稀土金属及其氧化物化学分析方法发射光谱法测定氧化镧,氧化铈,氧化钕,氧化钆中钴,铁,锰,铅,铬,镍,铜,锌的氧化物量
GB/T 12690.5-2017(英文版) 稀土金属及其氧化物中非稀土杂质化学分析方法铝、铬、锰、铁、钴、镍、铜、锌、铅的测定电感耦合等离子体发射光谱法(方法1) 钴、锰、铅、镍、铜、锌、铝、铬的测定电感
IEC 61249-2-6:2003 Materials for printed boards and other interconnecting structures - Part 2-6: Reinforced base materials, clad and unclad - Brominated epoxide non-woven/woven E-glass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad
IEC 61249-2-42:2010 Materials for printed boards and other interconnecting structures - Part 2-42: Reinforced base materials clad and unclad - Brominated epoxide non-woven/woven E-glass reinforced laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly
AS 4030.3-2002 Lead sulfide concentrates - Chemical analysis, Part 3: Determination of silver and gold contents - Fire assay and flame atomic absorption method using scorification or cupellation
ГОСТ Р МЭК 61249-2-6-2012 Материалы для печатных плат и других структур межсоединений. Часть 2-6. Материалы основания армированные фольгированные и нефольгированные. Листы армированные слоистые на основе тканого или нетканого стекловолокна Е-типа с бромсодержащим эпоксидным связующим, нормированной горючести (вертикальный тест горения), фольгированные медью
KS C 61249-2-10-2011(2016) 인쇄회로기판 및 기타 전자배선용 재료 — 제2-10부: 동박적층 난연등급(수직연소시험)의 유리섬유 직조 및 변형 혹은 무변형 시안산염 에스터르 및 브로민강화 에폭시 동박적층판 및 무동박적층판
BS EN 61249-2-10:2003 Materials for printed boards and other interconnecting structures-Reinforced base materials clad and unclad. Cyanate ester, brominated epoxide, modified or unmodified, woven E-glass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad
IEC 61249-2-10:2003 Materials for printed boards and other interconnecting structures - Part 2-10: Reinforced base materials clad and unclad - Cyanate ester, brominated epoxide, modified or unmodified, woven E-glass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad
IEC 61249-2-11:2003 Materials for printed boards and other interconnecting structures - Part 2-11: Reinforced base materials, clad and unclad - Polyimide, brominated epoxide modified or unmodified, woven E-glass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad
IEC 61249-2-5:2003 Materials for printed boards and other interconnecting structures - Part 2-5: Reinforced base materials, clad and unclad - Brominated epoxide cellulose paper reinforced core/woven E-glass reinforced surfaces laminated sheets of defined flammability (vertical burning test), copper-clad
DIN IEC 61249-2-42:2008-04 Materials for printed boards and other interconnecting structures - Part 2-42: Reinforced base materials, clad and unclad - Brominated epoxide non-woven/woven E-glass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly (IEC 91/753/CD:2008)
DIN EN 61249-2-6:2002-01 Materials for printed boards and other interconnection structures - Part 2-6: Sectional specification set for reinforced base materials, clad and unclad; Brominated epoxide non-woven/woven E-glass reinforced laminate sheets of defined flammability (vertical burning test), copper-clad (IEC 91/258/CDV:2001); German version prEN 61249-2-6:2001
DIN EN 61249-2-10:2002-01 Materials for printed boards and other interconnection structures - Part 2-10: Sectional specification set for reinforced base materials, clad and unclad; Cyanate ester, brominated epoxide modified or unmodified woven E-glass reinforced laminated sheets of defined flammability (vertical burning test) copper-clad (IEC 91/261/CDV:2001); German version prEN 61249-2-10:2001
DIN EN 61249-2-11:2002-01 Materials for printed boards and other interconnecion structures - Part 2-11: Sectional specification set for reinforced base materials, clad and unclad; Polyimide, brominated epoxide modified or unmodified, E-glass reinforced laminate sheets of defined flammability (vertical burning test) copper-clad (IEC 91/262/CDV:2001); German version prEN 61249-2-11:2001